Technical specifications
Measurement / control system | |
---|---|
Flow range, based on N2 (intermediate ranges available) |
min. 0,4…20 ln/min max. 1,4…70 ln/min |
Accuracy (incl. linearity) |
±1% FS |
Turndown | 1:50 (2...100%) |
Repeatability | < 0,2% Rd |
Settling time (controller) |
approx. 1 second |
Max. Kv-value | 6,6 x 10-2 |
Operating temperature | 0…50°C |
Temperature sensitivity | zero: < 0,1% FS/°C; span: < 0,1% Rd/°C |
Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
Attitude sensitivity | max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2 |
Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
Analog/RS232 | 9-pin D-connector (male); | Bronkhorst Việt-Nam |
PROFIBUS DP | bus: 9-pin D-connector (female); power: 9-pin D-connector (male); |
Bronkhorst Việt-Nam |
Devicenet™ | 5-pin M12-connector (male); | Bronkhorst Việt-Nam |
EtherCAT®/PROFINET | 2 x RJ45 modular jack (in/out) | Bronkhorst Việt-Nam |
Modbus/FLOW-BUS | RJ45 modular jack | Bronkhorst Việt-Nam |
Communication | A RS232 + analog (n/c control) B RS232 + analog (n/o control) D RS232 + DeviceNet (n/c control) E RS232 + DeviceNet (n/o control) M RS232 + Modbus* (n/c control) N RS232 + Modbus* (n/o control) P RS232 + PROFIBUS (n/c control) Q RS232 + PROFIBUS (n/o control) R RS232 + FLOW-BUS (n/c control) S RS232 + FLOW-BUS (n/o control) T RS232 + EtherCAT (n/c control) U RS232 + EtherCAT (n/o control) V RS232 + PROFINET (n/c control) W RS232 + PROFINET (n/o control) |
Bronkhorst Việt-Nam |
Analog output | A 0...5 Vdc B 0...10 Vdc F 0...20 mA sourcing G 4...20 mA sourcing |
Bronkhorst Việt-Nam |
Connections | 0 None 1 1/8” OD compression type 2 1/4” OD compression type 3 6 mm OD compression type 4 12 mm OD compression type 5 1/2” OD compression type 8 1/4” Face Seal Male 9 Other |
Bronkhorst Việt-Nam |
Customized IO options (pin 5, advanced operation) | 000 Disabled, pin 5 is pulled down to 0 Vdc (default selection) A1V 0…10 Vdc output, controller Analog signal for pump or external valve steering (control signal only) B1V 4…20 mA output, controller Analog signal for pump or external valve steering (control signal only) B2V 3.8…20.8 mA sourcing output, controller Analog signal for Badger Meter valve with TEIP11 signal converter (control signal only) C3A Digital output, min/max alarm During a min/max alarm, pin 5 is pulled down to 0 Vdc C4A Digital output, counter alarm During a counter alarm, pin 5 is pulled down to 0 Vdc C5S Digital output, enabled by setpoint (for shut-off control) Pin 5 is pulled down to 0 Vdc at a controller setpoint, e.g. for shut-off valve activation C0I Digital output, high/low switch via remote parameter (e.g. for shut-off valve activation) Pin 5 is pulled down to 0 Vdc when writing value ‘1’ to parameter ‘IO Switch Status’, this is undone by writing value ‘0’ D9E Digital frequency output, measure Measurement value is translated to a frequency within given frequency range F9B Digital pulse output, batch counter Pin 5 is pulled down to 0 Vdc when a given batch size is reached (during a given pulse length) H1P 4…20 mA input, external pressure sensor for active pressure correction I3C Digital input, controller mode valve close Valve closes when pin 5 is connected to 0 Vdc I8C Digital input, controller mode valve purge Valve is fully opened when pin 5 is connected to 0 Vdc I1R Digital input, reset counter The counter resets when pin 5 is connected to 0 Vdc I2R Digital input, reset alarm The alarm resets when pin 5 is connected to 0 Vdc |
Bronkhorst Việt-Nam |
FG-110C | 0,014…0,7 mln/min up to 0,18…9 mln/min | 100 bar(g)/1500 psi(g) |
FG-110CP | 0,014…0,7 mln/min up to 0,18…9 mln/min | 100 bar(g)/1500 psi(g) |
FG-111B | 0,14…7 mln/min up to 0,4…20 ln/min | 100 bar(g)/1500 psi(g) |
FG-111BP | 0,14…7 mln/min up to 0,4…20 ln/min | 100 bar(g)/1500 psi(g) |
FG-111AC | 0,2…10 ln/min up to 2…100 ln/min | 100 bar(g)/1500 psi(g) |
FG-200CV | 0,014…0,7 mln/min up to 0,18…9 mln/min | 64 bar(g)/1000 psi(g) |
FG-200CVP | 0,014…0,7 mln/min up to 0,18…9 mln/min | 10 bar(g)/150 psi(g) |
FG-210CV | 0,014…0,7 mln/min up to 0,18…9 mln/min | 100 bar(g)/1500 psi(g) |
FG-210CVP | 0,014…0,7 mln/min up to 0,18…9 mln/min | 100 bar(g)/1500 psi(g) |
FG-201CV | 0,14…7 mln/min up to 0,4…20 ln/min | 64 bar(g)/1000 psi(g) |
FG-201CVP | 0,14…7 mln/min up to 0,4…20 ln/min | 10 bar(g)/150 psi(g) |
FG-211CV | 0,14…7 mln/min up to 0,4…20 ln/min | 100 bar(g)/1500 psi(g) |
FG-211CVP | 0,14…7 mln/min up to 0,4…20 ln/min | 100 bar(g)/1500 psi(g) |
FG-201AV | 0,2…10 ln/min up to 2…100 ln/min | 64 bar(g)/1000 psi(g) |
FG-211AV | 0,2…10 ln/min up to 2…100 ln/min | 100 bar(g)/1500 psi(g) |
FG-201CS | 0,14…7 mln/min up to 0,4…20 ln/min | 10 bar(g)/150 psi(g) |
FG-201CSP | 0,14…7 mln/min up to 0,4…20 ln/min | 10 bar(g)/150 psi(g) |